One of the most commonly used grades in Vietnam. ADCo 60/70 bitumen is suitable for low to medium traffic and for provinces that experience colder weather conditions. This bitumen type also complies with Performance Grade 64 according to AASHTO M320.   ADCo 60/70 bitumen is available in bulk tankers or 200 kg drums. It complies with Circular 27/2014.

Microsurfacing involves a mix of polymer-modified emulsion, well-graded crushed mineral aggregate, mineral filler (normally Portland cement), water, and chemical additives that control the break time. The aggregate, mineral filler, emulsion, and water are mixed in a truck-mounted traveling plant, which is deposited into a spreader box. No compaction is needed, and under normal environmental conditions, traffic may be allowed within an hour after placement with EcoGrip®, our polymer-modified emulsion specifically designed for microsurfacing applications. Because this is a chemical curing process, material selection and mix design are crucial. ADCo technical team would be more than happy to support all their customers with elaborating suitable mix design and adjusting EcoGrip® formulation to fit with their requirements.   EcoGrip® complies with National Standard TCVN 12316:2018.

ADCo Trackless® is a technology that is sprayed on top of the tack coat to protect it and prevent removal by trucks or pavers during construction. ADCo Trackless® preserves the integrity of the tack coat,  provides an optimum interlayer bonding and keep your job site clean.

40/50 is a penetration-grade bitumen used in paving applications requiring a high level of mechanical performance. ADCo 40/50 bitumen provides a 30% higher stiffness modulus and significantly improves the rutting resistance of asphalt mixes compared to standard 60/70 bitumen. The best value for money!   ADCo 40/50 bitumen complies with Circular 27/2014.

One of the most commonly used grades in Vietnam. ADCo 60/70 bitumen is suitable for low to medium traffic and for provinces that experience colder weather conditions. This bitumen type also complies with Performance Grade 64 according to AASHTO M320.   ADCo 60/70 bitumen is available in bulk tankers or 200 kg drums. It complies with Circular 27/2014.

40/50 is a penetration-grade bitumen used in paving applications requiring a high level of mechanical performance. ADCo 40/50 bitumen provides a 30% higher stiffness modulus and significantly improves the rutting resistance of asphalt mixes compared to standard 60/70 bitumen. The best value for money!   ADCo 40/50 bitumen complies with Circular 27/2014.

One of the most commonly used grades in Vietnam. ADCo 60/70 bitumen is suitable for low to medium traffic and for provinces that experience colder weather conditions. This bitumen type also complies with Performance Grade 64 according to AASHTO M320.   ADCo 60/70 bitumen is available in bulk tankers or 200 kg drums. It complies with Circular 27/2014.

Our most performing Prime Coat. EcoPrime® is a Cationic bitumen emulsion specifically formulated to provide fast and deep Penetration of Base Course material. EcoPrime® allows contractors to proceed to asphalt paving between 2 and 4 hours after spraying. The Best  Alternative to Cutback asphalts.   EcoPrime® complies with National Standard TCCS 27:2019/TCĐBVN.  

Standard cationic slow-setting bitumen emulsion has a low viscosity and provides excellent active and passive adhesivity with most types of base materials.